2.PVC Conveyor Belt

Solid Woven Conveyor Belt (PVC)

Used in coal mine and other occasions require fire-resistant and anti static . Especially suitable for material conveying at inflammable of underground coal mines

Features and Benefits

The plastic type of solid woven conveyor belt (PVC)is used in dry operation area where the inclined angle is no greater than 16°(degree). Cover thickness can be from 0.5mm to 4mm.

  • Low stretch
  • Low maintenance
  • Anti-static
  • Flexible
  • Lightweight
  • Impervious to moisture, acids, oils, gases, sunlight
  • Excellent fastener holding
  • Excellent resistance to tearing, peeling and impact
  • Endless belt splicing
  • Special wear resistant edge design

Technical Data

Specification for belt carcass

Type 680s 800s 1000s 1250s 1400s 1600s 1800s 2000s 2500s 3150s 3400s
Min Tensile Strength(N/mm) Warp 680 800 1000 1250 1400 1600 1800 2000 2500 3150 3400
Weft 265 280 300 350 350
Min Elongation at Break(%) Warp 17 15 15 15 15 15 15 15 15 15 15
Weft 18 18 18 18 18 18 18 18 18 18 18
Recommended thickness (MM) 7.5 8 8.5 9 9 9 9 9 9 9 9
Recommended Cover Thickness (MM) PVC 1.5+1.5 1.5+1.5 1.5+1.5 2+1.5 2.5+1.5 2.5+1.5 3+2 3+2 3+2 based on conveyor systems

Specification for cover rubber

Item Standard
Test Strength(Mpa) ≧10.0
Elongation(%) ≧350
Abrasion(mm³) ≧200

Specification of roller

Model 580s 680S 800S 1000S 1250S 1400S
Diameter of minimum roller (mm) 500 630 630 630 800 800

Your Name (required)

Your Email (required)

Subject

Your Message

Share Product

Reviews

There are no reviews yet.

Be the first to review “Solid Woven Conveyor Belt (PVC)”