1.Corrugated Sidewall Conveyor Belt

Corrugated Sidewall Conveyor Belt

Sidewall conveyor belt can be used for horizontal, sloping or vertical conveyance, it is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space and requirement, no transfer point, low maintenance and big capacity.

Construction

product_1_1


product_1_2
product_1_3

The conveying capacity of transfer with sidewall

Base Belt Width (mm) Sidewall Height (mm) Cleat height H1(mm) BF(mm) Br(mm) R(mm)
300 40 35 25 180 35
60 55 50 120 40
80 75
400 60 55 50 180 60
80 75
100 90
500 80 75 50 250 75
100 90
120 110
650 100 90 50 350 100
120 110
160 140 75 300
800 120 110 50 460 120
160 140 75 410
200 180
1000 160 140 75 550 150
200 280
240 220
1200 160 140 75 690 180
200 180
240 220
300 280 105 630
1400 200 180 75 830 210
240 220
300 280 105 770
400 360
1600 200 180 75 970 240
240 220
300 280 105 910
400 360
1800 240 220 75 1110 270
300 280 105 1050
400 360
500 460 125 1010

Features and Benefits

  • Flexible Transportation

Corrugated sidewall conveyor belt can convey all kinds of bulk materials such as coal, ore, sand, fertilizer and grain in the horizontal, oblique, vertical or different angle directions. The granularity of materials can be from very small size to 400mm large particle size and the transportation volume is from 1 cubic meter / hour to 6000 cubic meters / hour.

  • High Tensile Strength

Corrugated sidewall conveyor belt has a very strong tensile strength and wear resistance. In order to meet the requirement of angular direction change, this type of belts must have flexibility in vertical direction and a certain degree of rigidity in horizontal direction. The base band of  Huacheng  corrugated sidewall conveyor belt has lateral rigidity and special structure which solved the collapse problem of large sized belts in the return process.

  • Solid Structure

a.The base band are composed of four parts: top covering rubber, bottom covering rubber, belt carcass and lateral rigidity layer. The thickness of top covering rubber is 3-6mm, the bottom covering rubber is 1.5-4.5mm. The carcass bears the tension. According to customer needs, the carcass materials can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or steel cord (ST). In order to increase the lateral rigidity of the base band, we add a special reinforced layer to the belt core which is called lateral rigidity layer.

b.The cleat is made of fiber-reinforced composites which has high stiffness and impact resistance to avoid deformation when the cleat is given a force. In the heavy wear and tear conditions, for easy maintenance, we can use embedded cleats such as TS and TCS type. T and TS cleat are normally used for conveyors with obliquity below 40 degrees, while C, TC and TCS are for conveyors with obliquity over 40 degrees. The cleat should be corresponding with the wave crest of the sidewall to prevent the material leakage and unloading dead angle. The sidewall, cleat and base band of Huacheng corrugated sidewall conveyor belt are spliced by second low-temperature hot vulcanization which gives high adhesive strength and smooth surface and prevent delamination. The cleat and sidewall are joint with bolts to increase the rigidity and performance and solves the material leakage problem.

Your Name (required)

Your Email (required)

Subject

Your Message

Category: .
Share Product

Reviews

There are no reviews yet.

Be the first to review “Corrugated Sidewall Conveyor Belt”