If all the connections to the DVD drive are safe, then it’s feasible that the board from the DVD drive has a brief on it or even a blown surface-mount fuse. Get rid of the DVD drive and change it by having a brand new someone to see if that actually works. If it will, you’ll either change the complete drive, or look for an upgraded board.
Then it may be a bad motherboard if the cables and the drive are not the problem that cause the DVD drive not to turn on. It is hard to check this without finding a brand new motherboard or testing your DVD drive for a known working console. In the event that drive nevertheless works on another board, then you’ll definitely need certainly to change the motherboard.
DVD drive shall perhaps perhaps not read discs. The drive takes discs, but will not read them
Bad information cable
Then there may be a bad connection with the data cable if the disc is spinning in the DVD drive, but the console can’t read it. The cable is really a ZIF ribbon cable that goes through the DVD drive to your mom board. First, eliminate the DVD drive to check out the connection here. Whether it’s fine, you will need to access the bond on the motherboard to ensure additionally it is safe. At this stage, in the event that connections are fine, you can also would like to try an alternative information cable, though it is really not most likely that the cable could be the issue unless there is certainly damage that is obvious it.
Bad laser lens
Then there is likely a problem with the laser lens in the DVD drive if the Wii takes discs, but cannot read them. Though you can simply change the laser, it really is easier and much more reliable to displace the DVD drive.
This can cause disk read errors if your Wii is very warm to the touch. Then completely shut down the Wii (red icelandic hot brides LED) and allow it to cool down, and then try again if this is the case. Read more